Customization: | Available |
---|---|
After-sales Service: | Good After Sales Service |
Warranty: | 12 Months |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Horizontal Lathe C Series 61160 61250 61200 61300Big Swing Diameter Heavy Duty Lathe Machine Price
This series conventional heavy-duty horizontal lathe, it suitable for high speed steel hard alloy cutting tool, various materials shaft parts, cylindrical and disk-shaped parts processing. To achieve turning cylindrical, face grooving, cutting slot, cutting off, boring and turning inside and outside the cone and other processes.
used heavy duty lathe machine main transmission for DC motor drive, the spindle speed is stepless speed regulation. So in the processing of different step and the work piece, it can obtain the reasonable cutting speed.
used heavy duty lathe machine feed system for the separation of transmission, use of SCR infinitely variable speed, wide variable speed range, under different processing conditions, it is able to choose the most reasonable feed amount, Machine tool guide ways after the processing of high frequency quenching and grinding process, it can improve the surface hardness and precision of machine tool, also have long service life.
1.Bed using high-grade quality gray cast iron is made by resin sand molding, and use the sealing sand structure, guide using three rectangular flat guide rail, using high frequency quenching and grinding technology. Bed upper width is 1600mm. Chip using the bottom chip mode.
2.Spindle supported by two points, bearings with a precision spindle bearings, transmission gear after high-frequency quenching and grinding process for processing, and the tooth top edge trimming technology, spindle box using the powerful oil for lubrication, the front spindle using reliable maze of closed institutions, can effectively prevent oil spills and foreign objects into the headstock.
3.The main transmission system by the DC motor-driven spindle rotation, between the main motor and transmission mechanism, connected by flexible coupling, it has good mechanical properties.
4.The tailstock consists of upper body and lower body. On the upper body is equipped with a tailstock spindle and the spindle centerline adjustment mechanism. Under the body is equipped with a tailstock fast moving mechanism and the locking mechanism. Tailstock sleeve adopts built-in top structure; sleeve quick shift and the tailstock sleeve fast moving mechanism are driven by separate motor drive.
5.Turret using the pressure plate holder is divided into three parts, by the large carriage, cross slide and the top knife block, with high strength, high rigidity and other characteristics, suitable for heavy cutting.
6.Extension unit rail paste tin zinc copper plate method, the apron and the saddle tool carrier linkage, motor vehicles to cut any cone.
7.Feed box for two axis sliding structure, can achieve the transformation of the various feed.
8.The hydraulic system used to control the hydraulic cylinders, realize the spindle box gear automatic shift and forced lubrication, the system works reliable, convenient maintenance.
The bed is the foundation of the machine, on which the other components are mounted. The tailstock is located at the opposite end of the bed from the heads
The carriage moves along the bed and holds the cutting tool, which can be adjusted vertically and horizontally. The cross slide moves perpendicular to the carriage and provides precision movement for the cutting tool. The feed rod is responsible for moving the carriage and cross slide, as well as controlling the depth of the cut.
Available in different sizes and capacities, horizontal lathe machine tools can be used for a variety of machining applications, ranging from small hobby projects to heavy-duty industrial work.
Technical items Model |
CW6163 / CW6263 |
CW6180Q / CW6280Q |
CW6180B / CW6280B |
CW61110Q / CW62110Q |
CW61125Q / CW62125Q |
CW61125B | CW61160B | CW61160 | CW61200 | CW61250 | ||||
Swing diameter over bed |
630mm | 800mm | 800mm | 1100mm | 1250mm | 1250mm | 1600mm | 1600mm | 2000mm | 2500mm | ||||
Swing diameter over carriage/cross slide | 350mm | 480mm | 480mm | 800mm | 920mm | 860mm | 1200mm | 1200mm | 1600mm | 2100mm | ||||
Swing diameter over gap/saddle |
CW6163-- No gap |
CW6180Q-- No gap |
CW6180B-- No gap |
CW61110Q-- No gap |
CW61125Q--No gap |
No gap |
||||||||
CW6263-- 800mm |
CW6280Q-- 1000mm |
CW6280B-- 1000mm |
CW62110Q-- 1300mm |
CW62125Q--1500mm | ||||||||||
Max. Length of workpiece | 1500mm; 2000mm; 3000mm;4000mm; 5000mm; 6000mm; 8000mm; 10000mm; 12000mm; 14000mm; 16000mm; 18000mm; 20000mm | |||||||||||||
Max. Weight of workpiece | 2 tons | 2 tons | 2.5 tons | 2.5 tons | 2.5 tons | 6 tons | 6 tons | 16 tons | 16 tons | 16 tons | ||||
Spindle hole diameter | 105mm | 105mm | 105mm | 105mm | 105mm | 130mm | 130mm | 130mm | 130mm | 130mm | ||||
Guide rail width | 550mm | 550mm | 600mm | 600mm | 600mm | 755mm | 755mm | 1100mm | 1100mm | 1100mm | ||||
Main motor power | 11 kw | 11 kw | 11 kw | 11 kw | 11 kw | 22 kw | 22 kw | 22 kw | 22 kw | 22 kw |
Following is 32 tons load capacity heavy duty lathe machine
Model | C61160 | C61200 | C61250 | C61315 | |
Max.swing over bed | mm | 1600 | 2000 | 2500 | 3150 |
Max.swing over carriage/tool post | mm | 1200 | 1600 | 2000 | 2600 |
Width of bed (Three lathe beds) | mm | 1600 | 1600 | 1600/2100 | 2100 |
Max.length of workpiece | m | 5-20 | 5-20 | 5-20 | 5-20 |
Max.weight of workpiece | ton | 32 | 32 | 32/75 | 75 |
Max.torque of face plate | kg.m | 8000 | 8000 | 8000 | 8000 |
Max.cutting capacity tool post | kg.m | 8000 | 8000 | 8000 | 8000 |
Section dimension of tool shank | mm | 70x70 | 70x70 | 70x70 | 70x70 |
Headstock | |||||
Progression of spindle speed | Stepless | Stepless | Stepless | Stepless | |
Range of spindle speed | rpm | 1~200 0.8-160 0.025-125 |
1~200 0.8-160 0.025-125 |
1~200 0.8-160 0.025-125 |
1~200 0.8-160 0.025-125 |
Diameter of chuck | mm | 1600 | 2000 | 2500 | 3150 |
Knife rest | |||||
Step. No of feed | step | 18 | 18 | 18 | 18 |
Range of longitudinal feed | mm/r | 0.125-48 | 0.125-48 | 0.125-48 | 0.125-48 |
Range of cross feed | mm/r | 0.063-24 | 0.063-24 | 0.063-24 | 0.063-24 |
Feed range of tool slide compound | mm/r | 0.063-24 | 0.063-24 | 0.063-24 | 0.063-24 |
Longitudinal rapid traverse speed | mm/min | 3000 | 3000 | 3000 | 3000 |
Cross rapid traverse speed | mm/min | 1500 | 1500 | 1500 | 1500 |
of cross slide | mm | 670 | 800 | 1000 | 1250 |
Metric thread (thread pitch) | mm | 2-40 | 2-40 | 2-40 | 2-40 |
Inch thread | mm | 1-14 | 1-14 | 1-14 | 1-14 |
Module thread | mm | 1.5-20 | 1.5-20 | 1.5-20 | 1.5-20 |
Tailstock | |||||
Traversing capacity of sleeve | mm | 200 | 200 | 300 | 300 |
Rapid traverse of tailstock | mm/min | 3000 | 3000 | 3000 | 3000 |
Rapid traverse of sleeve | mm/min | 664 | 664 | 664 | 664 |
Power | |||||
Main motor power | kw | 75 | 75 | 90 | 118 |
Our Services
We can provides 7x24-hour online pre-sale service, engineer follow-up order service, and logistics delivery operation service, And also we can provide installation services. In addition, with more than 10 years experience of various markets, we can help customers successfully complete a series of services from purchasing to goods Customs clearance, thereby saving times and also reducing customers' costs in all aspects.
Our advantage:
1: With CE, ISO certification.
2: Full production tracking.
3: Professional engineers can guarantee the highest quality.
4: More suppliers as alternatives, guarantee your lowest and competitive price.
5: Sales fstaff with more than 10 years experience, will answer your pre-sales and after-sales questions.
6: OEM production is available, to meet customer needs
7. Low MOQ (1 unit) is available.
8. 24 hours technical support.
Warranty period:
During warranty period (one year), if you have any parts broken because of qulity problem,we will supply to you free of charge by express.
Out of warranty period, if you have any question, you can contact us, we will supply our best service to you as usual.
1. Technical support online service provided .
2. Technical files service provided.
3. Machine operation video provided
4. On-site training service provided.
5. Spare parts replacement and repair service provided.
6. All of the questions will be replied within 24 hours
We are a direct-sale lathe machine manufacturer, not a trading company,
which means we can offer you the best prices.
Welcome get in touch with us:)
Tel:+86 18003851898